ARB Intensity Solis Driving Light 21 LED – Spot (EACH)
$407.00
Filled with features, Intensity Solis driving lights are available in a Spot or Flood beam which come with interchangeable red and black die-cast side bezels. New to the Intensity range is the Solis’ 5-stage dimmability function, while the introduction of a highly tuned single piece reflector and OSRAM LED performance bring it to the top of the class in light output.
Spot, Flood or a Combination?
How you set up your driving lights should reflect the type of driving and terrain you are driving in.
In areas of wide open land and fast roads a set-up of two spot lights will give you the best throw of light reaching as far down those long straight roads as possible.
For drivers who are predominantly in heavy bush with lots of winding roads, a set-up of two flood lights will fill the foreground, giving you great visibility to the side of the roads where animals like to hide and through the next close corner.
For most drivers, however, the combination of one spot (driver’s side) and one flood provides the best of both worlds. The single spot throws a strong direct beam down the road over 1km, while the flood beam fills the foreground and roadside what is often considered the optimal driving light pattern and output.
Features:
- LEDs @ 50,000-hour lifespan
- 15 x four-watt high-powered
OSRAM® LEDs - 6 x five-watt high powered
OSRAM® LEDs
- 15 x four-watt high-powered
- Voltage range 10V to 30V
- Power Drawer 80W @ 6.2A @ 13.2V
- Raw Lumens
- Spot & Flood – 9133 Lumens
- Effective Lumens
- Spot – 6100 Lumens
- Flood – 6000 Lumens
- Colour Temperature: 5700 Kelvin.
- Distance @ 1Lux
- 835m/2739ft Spot
- 620m/2034ft Flood (Single light).
- 9° full beam width Flood & 6° full beam width Spot.
- High-pressure cast aluminium body with oversized heat sink
- Integrated ARB engineered thermal management
- In-built digital LED driver control
- Unique ARB engineered flood reflectors
- Virtually indestructible clear-coated polycarbonate internal lens
- Hard-coated, optical grade, durable polycarbonate protective lens
- Pressure equalisation breather with pressure-tested seal
- MIL810-STDG vibration certified (military specifications)
- RoHS, R10 & CE compliant
- Dust and waterproof to IP68 & Submersible to three metres
- Over- and under-voltage protection to 30 volts
- Protected against radio frequency (RFI) and electromagnetic (EMC) interference
- Multi-position, high-pressure die-cast aluminium mounting bracket
- Four-pin, high-amperage waterproof connectors & Input Cable length – 450mm (17.7”)
- Engineered for use with the ARB Solis driving light wiring loom – Part no. SJBHARN – Required (sold separately)
- Warranty 3 years – Global warranty
- Included
- 1 x Light 1 x Clear cover
- 1 x Mounting bracket & Mounting hardware kit
- UV-resistant interchangeable red or black bezel